Archive for September, 2020

Buying “Made in China” May Support Slave Labor

Tuesday, September 22nd, 2020

One of the consequences of President Clinton’s granting China Most Favored Nation status and allowing them to become a member of the World Trade Organization is that China took over production of consumer goods previously made in the USA. As a result, the consumer products you buy that are “Made in China” may be made by slave labor.

The Global Slavery Index published by the Minderoo Foundation “estimates that on any given day in 2016 there were over 3.8 million people living in conditions of modern slavery in China, a prevalence of 2.8 victims for every thousand people in the country. This estimate does not include figures on organ trafficking…Much of its rapid economic development has been the result of a domestic economy specialising in the production of labour-intensive, cheap goods for export. Forced labour mainly occurs in the production of these goods, including in the manufacturing and construction sectors, as well as in more informal industries…,Other labour-intensive industries in China are also creating a demand for low-paid foreign labour. The sugarcane industry in China’s southern Guangxi province attracts an estimated 50,000 illegal Vietnamese workers. Factory towns in Southern China have been found to employ illegal workers from Vietnam on a widespread basis.”

The Index commented that “The Chinese government officially announced in November 2013 that it would abolish the Re-education through Labour (RTL) System, in which inmates were held and routinely subjected to forced labour for up to four years. However, a 2017 report by the US-China Economic and Security Review Commission alleges that China still maintains a network of state detention facilities that use forced labour.”

The purpose of the U.S.-China Economic and Security Review Commission is to monitor, investigate, and submit to congress an annual report on the national security implications of the bilateral trade and economic relationship between the United States and China, and to provide recommendations to Congress. If you read a chapter or two from any of the reports from 2017 – 2019, you would realize that Congress is not doing enough to address the threats China poses to the U.S.

In the staff research report, “U.S. Exposure to Forced Labor Exports from China,” Alexander Bowe, Research Fellow, write, “China maintains a network of prison labor facilities that use forced labor* to produce goods intended for export—a violation of U.S.-China trade agreements and U.S. law. U.S. officials continue to face considerable difficulty in combating exports of these forced labor products, since cooperation from Chinese interlocutors has remained at low levels for years. U.S. Immigration and Customs Enforcement (ICE) agents have not been permitted to make site inspections in China since 2009…”

In an article on June 11, 2019, the Epoch Times reported, “In undercover footage shot inside China’s notorious Masanjia labor camp, prisoners are shown hunched over work tables, with piles of wire diodes—an electronic component—on either side of a rubber mat. They do this work 15 hours a day, while being fed subsistence meals and receiving a pittance or no pay at all. Some inmates, exhausted, are shown lying down to sleep under their work tables.”

Another Epoch Times article of August 25, 2020, states, “For three years on and off, Li Dianqin worked for about 17 hours a day making cheap clothing—from bras to trousers—in a Chinese prison. She worked for no pay and faced punishment by prison guards if she failed to meet production quotas. One time, a team of about 60 workers who couldn’t reach their quota were forced to work for three days straight, not allowed to eat or go to the bathroom. The guards would shock the prisoners with electric batons whenever they dozed off.”

On March 1, 2020, the Australian Strategic Policy Institute released a report that stated, “Since 2017, more than a million Uyghurs and members of other Turkic Muslim minorities have disappeared into a vast network of ‘re-education camps’ in the far west region of Xinjiang…This report estimates that more than 80,000 Uyghurs were transferred out of Xinjiang to work in factories across China between 2017 and 2019, and some of them were sent directly from detention camps.”

The report explains, “Under conditions that strongly suggest forced labour, Uyghurs are working in factories that are in the supply chains of at least 82 well-known global brands in the technology, clothing and automotive sectors…”  The whole list is too long to publish in this short article, but it includes: Amazon, Apple, BMW, Calvin Klein, Carter’s, Cisco, Dell, General Motors, Google, Hitachi, HP, L.L.Bean, Mercedes-Benz, Microsoft, Mitsubishi, Nike, Panasonic, Polo Ralph Lauren, Puma, Samsung, Sharp, Siemens, Skechers, Sony, Toshiba, Victoria’s Secret, and Volkswagen.

It is noted that “ASPI reached out to these 82 brands to confirm their relevant supplier details. Where companies responded before publication, we have included their relevant clarifications in this report. If any company responses are made available after publication of the report, we will address these online…a small number of brands advised they have instructed their vendors to terminate their relationships with these suppliers in 2020.” The full report can be downloaded here.

On August 13, 2020, The New York Times updated a visual investigation revealing that “As the coronavirus pandemic continues to drive demand for personal protective equipment, Chinese companies are rushing to manufacture the gear for domestic and global consumption. A New York Times visual investigation has found that some of those companies are using Uighur labor through a contentious government-sponsored program that experts say often puts people to work against their will.”

The next time you are ready to buy an article of clothing or a pair of shoes “Made in China,” think about what the working conditions were like for the workers who made these items. Remember that “Made in China” could mean being made in prison by slaves or forced labor at private companies. Avoid buying from online websites as much as possible as current law doesn’t require information on where a product is made. Choose to buy Made in USA whenever possible. Take a look at the variety of products available at these websites:  www.madeinamericastore.com, www.buydirectUSA.com, and of course, www.themadeinamericamovement.com, which publishes my articles.

What Has Been the Impact of COVID-19 Pandemic on U. S. Manufacturing?

Tuesday, September 15th, 2020

How much the impact of the COVID-19 Pandemic has had on manufacturing depends on the state in which a manufacturer is located and what is the industry of the manufacturer.  According to Ballotpedia, “Seven states—Arkansas, Iowa, Nebraska, North Dakota, South Dakota, Utah, and Wyoming—did not issue orders directing residents to stay at home from nonessential activities in March and April 2020 in response to the coronavirus pandemic. The 43 other states all issued orders at the state level directing residents to stay at home except for essential activities and closing businesses that each state deemed nonessential.” Only South Dakota did not require any businesses to close.

On May 8, 2020, CNBC reported that by the end of the first month of the shutdown, manufacturing had lost 1,330,000 jobs, and its supporting  industry of transportation and warehousing had lost 584,000 jobs, out of the total job loss of 20.5 million. 

Accenture reported: The automotive industry is a critical component of economic growth with extensive interconnections to upstream (e.g. steel, chemicals, textiles) and downstream industries (e.g. repair, mobility services). With nearly 8 million employed in the U.S., employment in the automotive industry has taken a big hit. The automotive industry is considered essential for the global economy and the resulting prosperity.

CNBC reported that the “Aerospace Industries Association estimates that more than 200,000 jobs in the sector are at risk. Boeing earlier this year said it would aim to cut 10% of its workforce, which stood at 160,000 as of the end of 2019. While it is hiring for its defense unit, the commercial aircraft division has been hit by hundreds of cancellations this year, and CFO Greg Smith told investors on July 29 that 19,000 employees are departing Boeing. About 6,000 had left as of the end of June…At General Electric, which makes engines for both Boeing and Airbus planes, the company is cutting a quarter of the jobs, or 13,000 people in its aviation unit, which is based in Ohio.”

An article on PWC.com commented, “On the defense side of the industry, the situation appears less dire, with demand protected by budgeted government spending and a supply chain with minimal exposure to hard-hit jurisdictions such as Asia. However, events outside the US are affecting the US defense industry, as some US military partner nations may experience challenges in military readiness and ability to maintain equipment. Additionally, some defense companies may be financially weakened, but most likely to a lesser extent compared to consumer-facing aerospace companies.”

My manufacturers sales rep agency, ElectroFab Sales, was fortunate in that all of the California companies we represent were able to stay open because they were in the supply chain of one or more of the 16 essential industries allowed to stay open by California Governor Newsome. However, our open sales orders have dropped by 50% since February. This is primarily because too many of  our customers are in the defense and military sector, and all new product development for new systems has been put on hold indefinitely. In addition, repeat orders for existing systems have dropped.

The summer newsletter of the Coalition for a Prosperous America reported: The term ‘Made in USA’ is currently tracking at an all-tie high since 2004” on Google Trends.  Zach Molti of Atlas Tool Works said that “his company’s recent sales are up roughly one-and-a-half times their usual volume.”  “Bryan Hurley, the owner of Florida-based Americraft Cookware says that his sales have been up 167% of late compared to 2019.” Greg Owns, CEO of Liberty Tabletop, the only flatware manufacturer in the U.S., reported on our Buy American Committee call last Thursday, that orders are up 200% compared to 2019.

A number of CPA member companies had retooled and repurposed their operations to respond to the COVID-19 pandemic to make PPE goods and equipment. Numerous other manufacturers all over the country did the same thing.  Even Ford and GM retooled their factories to make ventilators.

Five months after the COVID-19 shutdowns began, manufacturing is bouncing back faster than everyone expedted. The September 1st Manufacturing ISM® Report On Business®  issued  by Timothy R. Fiore, CPSM, C.P.M., Chair of the Institute for Supply Management® (ISM®) Manufacturing Business Survey Committee showed that “The August PMI® registered 56 percent, up 1.8 percentage points from the July reading of 54.2 percent. This figure indicates expansion in the overall economy for the fourth month in a row after a contraction in April, which ended a period of 131 consecutive months of growth. The New Orders Index registered 67.6 percent, an increase of 6.1 percentage points from the July reading of 61.5 percent.  U.S. manufacturing activity came back strong and exceeded expectations for August, expanding at the fastest rate in almost two years.”

However, “…(1) commercial aerospace equipment companies, (2) office furniture and commercial office building subsuppliers and (3) companies operating in the oil and gas markets — as well as their supporting supply bases — are and will continue to be impacted due to low demand. These companies represent approximately 20 percent of manufacturing output. This situation will likely continue at least through the end of the year,” says Fiore.”

In an article on Manufacturing.net, Melvin Bosso, a principal with Myrtle Consulting Group, stated, “Reshoring is also an example of a dynamic that had started long before COVID-19 and will continue far beyond the emotional reaction to the catastrophic effects of the crisis.” He said, there are “four major clusters of reasons why a company makes a decision on how to deploy their supply chains: Costs, Service, Technology and Risk…most organizations have had to rethink their understanding of the fourth cluster – Risk…. All supply chains that run with a just-in-time inventory strategy had to deal with a shortage risk when China, and more broadly Asia, locked down. All essential industries are coming out of the crisis thinking about alternatives. Many are working, or will be working, to find ways to change their exposure.”

Harry Moser, Founder and President of the Reshoring Initiative® recently stated, “COVID has caused companies to reevaluate their supply chains. Often, shorter is better. By 4Q20 we expect to be helping 50 to 100 companies either buy smarter or sell smarter against imports. In most cases, we are providing this support through MEPs (Manufacturing Extension Partnerships) which exist in every state.”

We need to take advantage of this wake-up call to the risk of global supply chains, particularly our reliance on China, to create incentive plans to bring back manufacturing segments that are considered critical for national sustainability. Now is the time to reshore key industries from China to reduce the risk of future supply chain disruptions due to unforeseen events.  American consumers want to buy more “Made in USA” products.  Our government needs to use domestic manufacturing as part of its plan to build up strategic resilience in the aftermath of the current crisis.  It’s time for Congress to support reshoring with the right trade, tax, and currency policies to facilitate making the reshoring trend permanent.

Why Software Should be Made in USA

Tuesday, September 1st, 2020

Our modern world runs on computers and the software that controls them.  Software makes our computers usable for such activities as word processing, accounting, engineering design, production planning, Enterprise Resource Planning (ERP), communication, CGI, 3D printing, teleconferencing, and videoconferencing, not to mention the thousands of Apps for iPhones and Android phones. Software controls many functions of automobiles, trains, boats, ships, and airplanes. If software fails, it can mean the loss of life.  This is why is just as important for software to be Made in USA as it is for manufactured goods.  It is also important for software to be developed in the USA so we can make sure that there is no embedded malware, spyware, or backdoors.

My own manufacturers rep sales agency has been computerized since 1988, and I couldn’t function without my systems. I have also been participating in teleconferencing since 2011 for monthly meetings of  the Coalition for a Prosperous America and giving webinars since 2013 after publishing my second edition of Can American Manufacturig be Saved? Why we should and how we can in 2012.  I have used a variety of programs for videoconferencing, such as Cisco’s Webex, www.GotoWebinar.com, and www.vimeo.com.  Earlier this year I gave a webinar using Zoom. 

After the COVID-19 pandemic hit and shutdowns on nonessential businesses went into effect, many of my customers and prospects started working from home. Many of my customers are in the defense and military supply chain, and my contacts are purchasing agents and engineers. My contacts began to tell me that they were participating in staff meetings using Zoom. The meetings were most likely discussing current contracts and new products in development, but may have included proprietary or classified material.

As the months went by, it became more and more common to hear about Zoom meetings.  I began to wonder how Zoom had taken over the marketplace for videoconferencing from all of the other programs I had previously used. Then, one of my business associates told me that Zoom was allowing people to use its teleconference software for free.  I also heard that Zoom was a Chinese company, but I learned that is not true when I checked it out.

According to Wikipedia, “Zoom Video Communications, Inc. (Zoom) is an American communications technology company headquartered in San Jose, California…Eric Yuan, a former Cisco Webex engineer and executive, founded Zoom in 2011, and launched its software in 2013.”

On April 15, 2020, CNBC reported “Co-founder and CEO Eric Yuan, who previously worked on the Webex video calling product that Cisco acquired in 2007, is the largest individual shareholder of Zoom with 3.9% of the stock’s outstanding shares. He emigrated from China in 1997, when he was 27, CNBC previously reported, but he is a U.S. citizen, according to a December regulatory filing.” The concern about China is probably because CNBC also reported “Zoom’s product development team is based “largely” in China, and it operates research and development centers in that country, according to the company’s most recent annual report.”

Wikipedia explained its exponential growth: “During the COVID-19 pandemic, Zoom saw a major increase in usage for remote work, distance education, and online social relations. Thousands of educational institutions switched to online classes using Zoom. The company offered its services for free to K–12 schools in many countries.”  Chinese companies often sell products at or below cost to take over market share, so Zoom may be following this example. But, I don’t know how any company can afford to give away its product for free unless it is receiving funding from another source.

Regarding Zoom, Wikipedia states “Its software products have faced public and media scrutiny related to security and privacy issues.”  These criticisms cover “security lapses and poor design choices” and “its privacy and corporate data sharing policies.”

An article titled, “Zoom security flaws and Chinese links make US authorities nervous,” on Telecoms news of April 6, 2020, clarifies the connection to China, stating, “the software appears to be developed by three companies in China, all known as Ruanshi Software, only two of which are owned by Zoom. The ownership of the third company, also known as American Cloud Video Software Technology, is unknown. The article states “700 employees are currently in China, which is not unusual as it can save on salaries in comparison to the US, though it does open up the firm to pressure and influence from the Chinese Government.”

This same article reported that Zoom has servers in China that were used by mistake during the initial surge of usage after the COVID-19 pandemic struck. The article’s author, Jamie Davies wrote:

“By default, all participants’ audio and video in a Zoom meeting appears to be encrypted and decrypted with a single AES-128 key shared amongst the participants. The AES key appears to be generated and distributed to the meeting’s participants by Zoom servers. Zoom’s encryption and decryption use AES in ECB mode, which is well-understood to be a bad idea, because this mode of encryption preserves patterns in the input.”

These encryption keys could also be distributed through Chinese servers, which is a bad idea for anyone as companies can be legally compelled by the Government to hand over these keys. Zoom has said this oversight has been corrected and no international meetings will be routed through Chinese servers, but the damage may well have already been done.”

As a result of these concerns, Wikipedia states, “In March 2020, New York State Attorney General Letitia James launched an inquiry into Zoom’s privacy and security practices; the inquiry was closed on May 7, 2020, with Zoom not admitting wrongdoing, but agreeing to take added security measures. Also, in May 2020, the Federal Trade Commission announced that it was looking into Zoom’s privacy practices.

While there is no evidence of wrong-doing on the part of Zoom as of this writing, the fact that their programming is said to be done in China raises troubling security concerns, as programmers in China could easily be pressured by their government to put back doors into the software they write. This is why it is as essential to our national security to keep computer software development in our own country, just as it is important to keep drug development and medical equipment manufacturing in our own country.

Until the FCC investigation is concluded, some security experts are recommending that the President issue an executive order prohibiting the use of Zoom by government agencies, as well as defense contractors to insure no classified or proprietary information is compromised.