Archive for the ‘National security’ Category

« Older Entries
Newer Entries »

“Eliminate the Trade Deficit” Resonates in Halls of Congress

Tuesday, March 21st, 2017

 “You were ahead of the curve on trade.” This was the common refrain heard last week by members of the Coalition for a Prosperous America who attended our annual fly-in to Washington, D. C. We had eight teams of members visiting Congressional Representatives and Senators on March 14th and 15th. As Chair of our developing California chapter, it was my fifth year attending the CPA fly-in, and our simple message of eliminating the trade deficit resonated well in the halls of Congress.

No one could deny that we have a huge deficit as shown on the chart below:

 

The annual trade deficit has reduced our U. S. GDP by some 3% to 5.5% each year, and those reductions compound over time.

There is no historical record of any other country in history running 41 years of consecutive trade deficits. Why is this important? Because every billion dollars of net imports costs 4,500 American jobs according to conservative estimates. So last year’s $502 billion deficit equates to 2.25 million jobs lost.

As a result, our Labor Force Participation is in serious decline. The U. S. is the only G7 nation with a DECLINE in LFPR since 1998 for workers ages 15-64. It peaked at 77.4% in 1998 and dropped down five points to 72.6% in 2015, meaning that over 7 million people dropped out of labor force since 1998.

The remedy recommended by the Coalition for a Prosperous America is simple: Congress should establish a national goal to eliminate the trade deficit.

Balanced trade over time is the goal of free trade and of fair trade. Balanced trade will re-industrialize our country, enable massive job creation, grow our wealth and effectively neutralize foreign mercantilism. Trade policy must address true drivers of deficit, these countries and their practices. Many of these countries have export-oriented growth strategies in which they rely upon the US market to consume their exports rather than increasing their internal consumption. China, Germany, Japan and other countries pursue net exports through strategic mercantilism, not free trade. Currency manipulation, value added taxes, state influenced enterprises, and other
tactics are used.

The following top 10 countries account for 90% of America’s 2016 goods trade deficit:

Rank Country 1992 Deficit 2016 Deficit Change 1992-2016
1 China -$18B -$355B -$337B
2 Mexico -$6B -$115B -$121B
3 Japan -$50B -$75B -$25B
4 Germany -$8B -$70B -$62B
5 Canada -$15B -$58B -$53B
6 Ireland +5B -$36B -$37B
7 Vietnam $0B -$34B -$34B
8 South Korea -$2B -$30B -$30B
9 Italy -$4B -$30B -$26B
10 India -$2B -$30B -$28B

Note: These figures are based on U.S. Commerce Dept. data subtracting Imports for Consumption from Domestic Exports which are intended to strip out goods that enter and leave the U.S. simply for re-export, without having any significant value added to them inside the U.S.

Currency manipulation and misalignment are key tactics that the above countries use to gain an advantage in trade. Currency manipulation is trade cheating, because it is both an illegal tariff and a subsidy.

Foreign governments intervene in foreign exchange markets by buying dollars. More than 20 countries have intervened in foreign exchange markets to undervalue their currencies in the past ten years. These countries account for one-third of the world economy and two-thirds of the world’s current account surpluses. Gagnon has calculated that “A country’s current account balance increases between 60 and 100 cents for each dollar spent on intervention.”

“The largest loser is the United States, whose trade and current account deficits have been $200 billion to $500 billion per year larger as a result. The United States has thus suffered 1 million to 5 million job losses.” (Bergsten, 2012) The U. S. economy cannot produce jobs and wealth without addressing this problem. The Coalition for a Prosperous America proposes the following solutions:

• U.S. trade enforcement law should treat currency undervaluation as a countervailable subsidy
• Tariffs should be applied against currency manipulators to neutralize their unearned advantage
• Government policy should pursue a dollar priced at equilibrium rather than accept a persistently overvalued dollar
• Trade agreements should include effective controls on currency manipulation and misalignment

Border Adjustable Consumption Taxes (aka VATs) are a tariff by another name. They are allowed under WTO rules and range from 12% to 24% with the average being 17% globally. This means that virtually all foreign countries tax our exports at this average 17% VAT. They subsidize domestic shipments abroad with rebating the VAT to their manufacturers. The U.S. does not have a VAT to offset this advantage.

Consumption taxes are a tax on consumption as opposed to income, wealth, property, or wages. A Goods and Service Tax (GST) and a Value Added Tax (VAT) are consumption taxes. They are usually a tax only on the “value added” to a product, material, or service. Over 150 countries have such taxes, but the U. S. does not.

The U. S. negotiated tariff reductions or elimination in good faith with our trading partners under NAFTA and the Central America Free Trade Agreement (CAFTA, but Mexico instituted a 15% VAT, and Central America established a 12% VAT.

After 40 years of tariff reduction under various trade agreements, other countries replaced tariffs with VATs, but the U. S. did not. Thus, American exporters face nearly the same border taxes as they did in the early 1970s.

To solve this problem, the Coalition for a Prosperous America proposes that Congress implement a border adjustable consumption tax (VAT) and use the proceeds to credit against the payroll taxes paid by all workers and businesses. The benefits would be:

• Reduce the cost of labor in the U.S.
• Give every worker a raise
• Lower the price of U.S. exports
• Levy a tax on imports

In President Obama’s 2016 budget, Payroll Taxes were projected to be 31% of the revenue or $1.11 trillion. If a 12.9% VAT were set, it would produce approximately $1.45 trillion in tax revenue, completely offsetting the revenue from Payroll Taxes. All Payroll Taxes could be eliminated with a credit. With a 15% VAT, other tax reform or domestic production cost reduction could be funded. European Union countries use their VATs to provide another revenue stream to allow them to reduce their corporate taxes to be more globally competitive.

The benefit of giving a Payroll Tax credit out of VAT funds is that it would offset the regressiveness of a VAT by elimination of the regressive Payroll Tax. There would be no impact on prices of domestic goods and services, but prices of imported goods and services would increase. This would incentivize consumers to buy Made in USA products instead of imports. In addition, it would reduce the cost of production for U. S. producers enabling them to be more competitive in the global marketplace.

Our Coalition members also encouraged Congress to reinstate the Country of Origin Labeling (COOL) that was struck down by an unelected foreign tribunal of the World Trade Organization. Congress caved in to the WTO ruling and passed repeal legislation that exceeded the WTO ruling eliminating COOL for beef and pork, as well as for ground beef and ground pork.

Canada and Mexico want to export their cattle, hogs, beef, and pork to the U. S. without informational labeling that reveals where the cattle and hogs were born, raised, and slaughtered. Right now, meat packers are able to import cattle and hogs and slaughter them to get the USDA stamp. Consumers want to know where cattle and hogs were born and raised, not just slaughtered for reasons of food safety.

Congressional Representatives and Senators need to have the courage to reinstate COOL and vigorously defend our national sovereignty and consumer choice against international interference. COOL legislation enables consumers to Buy American in the grocery store. It prevents consumer deception and empowers consumers to buy food produced under the safety regime of their choosing. It would help to jumpstart America’s ailing rural economy through supporting domestic producers and preventing industry consolidation.

The final message that is critical is that the U. S. must modernize its foreign investment rules to protect American companies that are critical to our national security and economic security. Investors from countries like China, Japan, and South Korea are making strategic acquisitions of U. S. companies and land that threaten our security and future prosperity. These same countries either severely restrict or do not allow 100% acquisition of companies in their country. The Committee on Foreign Investment in the U.S. (CFIUS) can block incoming investment based upon national security concerns, but not for economic strategy reasons as other countries do.

Congress must update the laws governing foreign investment to include economic security and allow longer review periods, beyond 30 days, for CFIUS to review proposed investments. This would allow more time to gauge systemic threats to U. S. interests in addition to individual cases. The legislation should include a “net benefit” test to encompass American economic interests where proposed acquisitions of companies that are important to future U. S. technology and employment are concerned (both civilian and defense related).

The question now is – Will Congress have the courage to take the bold action needed to eliminate the trade deficit, address currency manipulation, reinstate COOL and control foreign investments? Time will tell.

 

Tags:, , ,
Posted in Manufacturing, National security, Taxes/Regulations, Trade Policy | No Comments »

Coalition for a Prosperous America Summit Discusses How to Grow Economy

Thursday, December 8th, 2016

On October 13, 2016, the “Southern California Manufacturing Summit” was held at the Wedgewood Center in Aliso Viejo. The summit was hosted by the Coalition for a Prosperous America (CPA), with SDG&E/Sempra Utilities as the major sponsor, along with a long list of non-profit organizations, regional businesses and associations as sponsors and partners. The purpose of the summit was to learn and discuss how we can use Southern California’s advantages to re-grow manufacturing and create good paying jobs through smarter policies on trade, taxes, and the economy.

CPA is a unique alliance of manufacturing, agriculture, and labor working for smart trade policies and represents over three million households through our member associations and companies.
Since nearly all of our sponsors provide services that benefit manufacturers, we modified our format from previous summits to provide opportunities for our sponsors to tell about their services to promote networking among attendees.

Our first speaker was Greg Autry, Adjunct Professor of Entrepreneurship, Marshall School of Business, University of Southern California, who discussed “National Security Concerns with the Current U.S. Trade Regime.” Among the highlights of his presentation was his statement, “There are national security concerns with trade agreements. An economy that builds only F-35s is unsustainable – productive capacity is what wins real wars. Sophisticated systems require complex supply chains of supporting industries. They require experienced production engineers, machinists, and more.”

He recently prepared a report analyzing the competition and found that we are now outsourcing most of our space-related technology. He said, “NASA awards contracts for launch vehicles to Boeing and Space X, but chose to buy Russian lower stage engines. We have to choose if we are going to have a supply chain for the space industry. We cannot rely on China to produce what we need for our military and defense systems.

He added, “The International Space station was funded by the U. S. to the tune of $100 Billion of the $120 Billion that it cost. We should not be relying on Russia’s Mr. Putin to launch our satellites and space vehicles and provide us a seat to get to the international space station.”

Autry stated, “If you own stock in Alibaba, you actually own stock in a holding company in the set up in an offshore tax haven of the Cayman Islands, and the real owner behind Alibaba is the Chinese government. In contrast, he said, “It was the wealth he created at Amazon that enabled founder Jeff Bezos to now lead Blue Origin, which was selected by the United Launch Alliance to finish development of a new engine to replace the Russian made RD-180 rocket engine used by ULA’s Atlas 5 rocket.”

He pointed out that the Germans had the best technology in WWII, but didn’t win because we out produced them. Productive capacity is what wins wars. We wouldn’t be able to do the same for a future war as China has become the shop floor for too many American manufacturers. Take the U.S. F-22 airplane vs. the Chinese J20 airplane. We have 187 F-22s, and we stopped producing them because they were too expensive. China has several hundred J-20s, and they are still producing them.

He warned, “China has been an aggressive nation for thousands of years – it’s how the country grew from a small nation state. China has expanded their claim to territorial waters to include territory claimed by all of its immediate neighbors — Taiwan, South Korea, Vietnam, Japan, the Philippines, Japan and even New Zealand and Australia. China’s threat to these countries could eliminate getting supplies from Vietnam, Taiwan, and Korea, where companies are located that are now part of our supply chain for the military and space industry. We are going to lose our supply chain for the military and defense industry because the people in the State and Commerce Departments don’t talk to the Defense Department.”

After his presentation, July Lawton, President of The Lawton Group/TLC Staffing, explained that her company provides temporary to permanent staffing solutions for engineering, manufacturing, information technology, as well as the more traditional human resources, accounting, administrative, marketing, and healthcare positions.

Nicholas Testa, Jr., CFPIM, CSCP, CIRM, is founder and CEO of Acuity Consulting, Inc. a firm specializing in supply chain and operations management and systems consulting and training. He is president-elect of the APICS Orange County and described the types of supply chain education and training that APICS provides to its manufacturing industry members.

Economist Ian Fletcher, author of Free Trade Doesn’t Work” was the next speaker. A few highlights of his presentation were: “Free trade is trade without restrictions. Economic rivalry is taking place every day. There is rivalry for wealth and power. We live in America, and it does matter where you live. America’s trade deficit is averaging $500 B/year. Free trade is part of the cause of poverty, as well as family breakdowns. Free trade mostly destroys jobs. We are looking in a decline of quality rather than quantity of jobs. De-industrialization is occurring. Many major American companies are not American any longer; they are owned by foreign corporations. Boeing is losing manufacture of airplane wings to Mitsubishi. There is not a single airplane that doesn’t rely on parts from other countries.”

He stated, “Free trade simplified means there must be something good for both parties. Free trade is only one sided by the United States because many countries practice mercantilism. Trade is being manipulated to benefit our trading partners. The Euro currency has been manipulated to reduce the value of the currency of Germany to be lower by balancing it out with the economies of France, Italy, Spain, and Greece. The U.S. is being forced to compete with the state capitalism of Europe and Asia.”
He added, “Free traders say that trade deficit doesn’t a matter, but trade deficits mean that we consume more than we produce. David Ricardo’s theory of comparative advantage did not work when it was created and doesn’t work now. A nation needs some protection. Protectionism is really the American way. Alexander Hamilton was the founder of American protectionism. The U.S. had a protectionist policy until after WWII. Every country has done protectionism to succeed. He showed a chart showing the history of tariffs in the U. S.

 

 

 

 

 

He concluded, “After WWII, free trade became a policy because of the politics to win the Cold War. It is crumbling now because of politics. There are dangers in protectionism, but there are dangers in doing nothing. Treaties or trade agreements are basically about protecting property rights. The World Trade Organization has failed to enforce terms of current trade agreements and will not do any better with the proposed Trans Pacific Partnership Agreement.”

After the morning break, I provided a brief overview of California manufacturing prior to moderating our panel of manufacturers. California is the 8th largest economy in the world, and if it were a country, it would be equal to France. California lost 33.3% of manufacturing jobs between 2000 and 2009 compared to 29.8% nationwide, and lost 25% of its manufacturing firms.

I pointed out that even with its unfavorable overall business climate, California still ranks first in manufacturing for both jobs and output. However, since the Great Recession, California lags in manufacturing job growth at a 3.6% rate compared to the national 7.2% rate and a GDP growth rate in manufacturing of 11.2% in California compared to a 22.6% GDP growth in the U. S. as a whole.

On the positive side, California leads the nation in R&D and number of patents issued, and
California companies received $78.4 billion of VC dollars in 2015 (57% of U.S. total – up from 51% in 2010).

Mexico, Canada, China, and Japan are the top four export markets for California, and California represents 11% of total U. S. exports. California ranks second behind Texas in all exports, but
California ranks first among all 50 states in agricultural exports estimated at $13.6 billion per year. California is the biggest U. S. producer of nuts, dairy, ice cream, and wine. The top high tech export is computers and electronic products, which equals 26.1 % of all the state’s exports. Transportation goods are the second top export, consisting of airplanes, ships, unmanned vehicles, and underwater vehicles.

Besides the good weather, Southern California’s advantages are:

• Gateway to Pacific – two major ports – Long Beach and San Diego
• Major hub in western U.S. for air, rail roads & waterway transportation
• Skilled, educated workforce for ALL occupations
• Research Institutions and Universities
• Large inventor/entrepreneur pool
• Hundreds of business Incubators and Accelerators
• Angel investor networks
• Venture capital networks
• 18 Foreign Trade Zones
• Employment Training Panel funds for employee training
• Workforce Investment Boards

There is also an abundance of business resources in Southern California, such as the California Manufacturing Technology Consulting (designated California MEP), two Centers for Applied Competitive Technologies, several Small Business Development Centers and Economic Development Agencies, as well as many Chambers of Commerce and Business Councils.

I concluded with mentioning the opportunities we have to improve the California business climate, change our national tax and trade policies, return manufacturing to U.S. through reshoring, connect regional manufacturers with other U. S. suppliers, increase collaboration between manufacturers and community college to address workforce and skills gaps, and educate community/youth about career opportunities in manufacturing.

After my presentation, the following three panelists shared their stories:

James Hedgecock, Founder and President of Bounce Composites, which designs, engineers, and manufactures high-quality, durable composite goods for multiple industries, including wind energy, automotive, aerospace, and sporting goods. He shared that the company started out producing their own patented design of stand up paddleboards, but it has been tough to compete with offshore companies because of unfair trade practice. He said it was especially difficult to export to Mexico and Europe because Value Added Taxes (VATs) are added to the price of their products, making their product more expensive.

Robert Lane and Dave Mock, principals of Lane OPX, shared how they help companies optimize excellence through blending Lean Six Sigma principles, strategic business initiatives and participative management philosophies to grow organizations, and inspire high performing, motivated teams. By leveraging their deep experience in manufactur9ing, team dynamics, leadership development and organizational design, they have been able to power the turnaround of small to large companies. More recently, they have been able to help manufacturers return manufacturing to America from overseas.

Mr. Wei-Yung Lee, CEO of Carlsbad Technology Inc. was our final panelist. Based in Carlsbad, California, Mr. Lee said that Carlsbad Tech was founded 1990 and is a subsidiary of Taiwan’s leading YungShin Pharmaceutical Co. The company began as a contract manufacturer of generic pharmaceuticals and has become an industry leader in manufacturing and distribution of generics, supplements, and medical devices. He said, “We have 150 employees and 15 are well-trained chemists. We have the capacity to produce 60 million capsules and 400 million tablets per year. Last year, we Launched our Comfort Vision™ contact lenses in the USA and have sold over 1 billion units in Asia. We are striving to become a global health bridge, bringing a world of innovative health products to the markets that need them. ”

After the panel, Jill Berg, President of Advanced Test Equipment Rentals, told about the products and services of her company. They rent, lease, and sell a large selection of test and measurement equipment and other types of lab equipment to companies all over the world. She announced that her company was hosting a San Diego Test Equipment Showcase on October 18th.

Then, Chris Marocchi, Field Operations Manager of California Manufacturing Technology Consulting (CMTC), explained that his organization is a non-profit consulting organization that just won the competition to provide Manufacturing Extension Program services for all of California. These services provide innovation and growth strategies along with operational enhancements to foster profitable growth for California companies. MEP services include: innovate new products, open new markets, improve workforce skills, increase product quality and reduce costs through Lean training, increase energy efficiency and green production, and optimize supply chain performance.

After our lunch break, I presented information on Lean Six Sigma Institute (LSSI) as neither of the principals was able to attend and I had obtained my Yellow Belt Certificate in Lean Six Sigma from LSSI in 2014. LSSI is boutique-style training and consulting company that uses training and coaching model to guide companies to manage Lean Six Sigma change, develop internal leaders, and sustain the results. LSSI’s is headquartered in Chula Vista California, but has satellite offices located in nine countries and employs over 60 expert consultants worldwide. Lean and six sigma principles and tools apply to virtually any process, and LSSI has successfully helped clients implement Lean Six Sigma in a variety of industries, such as manufacturing, retail, and healthcare.

Our key note speaker for the summit was Michael Stumo, CEO of the Coalition for a Prosperous America, speaking on “Growing SoCal Manufacturing.” Mr. Stumo stated, “CPA is a true coalition
of manufacturing, agriculture, labor, Republicans, Democrats, Progressives, Conservatives, and Independents. Our members are: Trade Associations, companies, farm organizations, Labor Unions, and individuals from all walks of life. Our non-Agriculture industries are: manufacturers, steel, tooling and machining, electronics, textiles, copper, aluminum, etc. Our mission is to balance trade and produce more in America to reclaim American prosperity.”

Mr. Stumo explained that there is a difference between service jobs and manufacturing jobs. According to Investopedia, “Examples of service sector jobs include housekeeping, psychotherapy, tax preparation, legal services, guided tours, nursing and teaching. There are very few “tradable” service jobs. By contrast, individuals employed in the industrial/manufacturing sector might produce goods such as cars, clothing and toys.”

He said, “There is also a difference in income and purchasing power between manufacturing and service jobs. When considering what industry sectors to prioritize for workforce and economic development efforts, it is important to look beyond basic employment numbers. This is because, while a sector might have a lot of jobs, it might not actually be producing a lot of income for the region, which is also very important for overall economic health and vitality.”

Mr. Stumo stated, “The problem is that as more manufacturing jobs leave, more productivity leaves as well. Unlike manufacturing, service-sector jobs have strict limits in terms of productivity. For example, a live performance of Beethoven’s 5th requires the same amount of performers/employees as when it was performed early in the 19th century. Compare that with the production of almost anything manufactured — the number of workers now required to produce a bolt of fabric, for example.”

He added, “There is a regional ripple effect of service vs. manufacturing jobs. At $4.4 trillion in total sales, manufacturing is by far the biggest income generator in our nation, despite a fairly rapid decline in employment. Yet, manufacturing still manages to far outperform all other industries in terms of pure income creation. Manufacturing generates more income per worker and has much bigger ripple effects, creating much more impact in a region while helping to raise wages in lower-productivity service sectors.”

He asked the rhetorical question, “What’s wrong with a service economy? He answered, “It shrinks manufacturing employment as well as the manufacturing sector’s ability to prop up wages. A labor market that loses wage pressures of high-productivity manufacturing industries will settle at wage rates lower than markets where this wage-boosting effect is present. Economic development policy makers should be careful about shunning manufacturing or other production sectors in favor of service sectors. This is a problem because 66% of U. S. workforce is without a four-year college degree.”

He concluded stating, “America is at a crossroads. We are losing an economic competition against other nations whose mercantilist strategies are destroying our manufacturing jobs, critical industries, and our standard of living, our national security, the security of our food supply, and our children’s futures. For the U. S. to become prosperous again, our future strategy must include the following:

• National Priority of Balanced Trade
• Strong enforcement
• Stop new trade agreements to force a re-think.
• Neutralize currency manipulation
• Tax reform with VAT/consumption taxes
• Consider tariffs to neutralize imbalances

We have a choice. We can continue our current trade and tax policies or we can develop and implement a comprehensive strategy that retains and reinforces our leadership in innovation, locates investment and production in the U. S. and raises employment by creating good paying jobs.”

As chair of the California chapter of CPA, I hope you will join our efforts to make America prosperous again.

Tags:, , , ,
Posted in Economy, Jobs, Manufacturing, National security, Taxes/Regulations, Trade Policy | No Comments »

How Could the Trans Pacific Partnership Affect you or your Business

Tuesday, April 19th, 2016

On February 4, 2016, President Obama signed the Trans Pacific Partnership Agreement on behalf of the United States. The TPP agreement has been in negotiation behind closed doors since 2010 between the United States and 11 other countries around the Pacific Rim: Australia, Brunei, Canada, Chile, Japan, Malaysia, Mexico, New Zealand, Peru, Singapore, and Vietnam. The TPP is a “docking agreement” so other countries could be added without the approval of Congress. India, China, and Korea have expressed interest in joining the TPP.

Our elected representatives in Congress had no involvement in writing the TPP – it was written by the staff of the U. S. Trade Representative office, with over 600 corporate advisors (think corporate lawyers) helping them write it. It contains more than 5,500 pages, and no member of Congress could view it as it was being negotiated until late 2014. Even then, they could not take any staff with them and were not allowed to take pen, pencil, paper, or a camera when they went to view it at the U. S. T. R.’s office.

The full text of the TPP was finally released to the public to review in November 2015, and it now awaits Congressional approval. According to the rules established by the Trade Promotion Authority (TPA) that passed Congress narrowly in June 2015, Congress will only be allowed 45 days for committee analysis after the bill is introduced, only 15 days after that is completed to bring it up for a floor vote, and only 20 hours of debate in the House and Senate. The TPA does not allow any amendments, filibuster, or cloture. Notice that the TPP is called an “Agreement,” as was NAFTA, CAFTA, KORUS, and every other trade deal in the past 22 years. The purpose for this is to get around the requirement of the two-thirds vote of the Senate to approve a Treaty that is required under Article 1, Section 8 of the Treaty clause in the U. S. Constitution. The TPP requires only a simple majority vote (50% + one.)

Supporters of the TPP say that it represents 40% of the world’s economic activity (GDP), but they fail to mention that the U. S. and its current trading partners represent 80% of that 40%. The other five countries represent the other 20%, with Japan alone being 17.7% of that total.

The current goal of trade agreements as given by Congress to the U.S.T.R is to “remove trade barriers,” such as tariffs, quotas, etc. and increase U. S. exports. The U. S. cut tariffs and opened our markets by means of these trade agreements. However, our trading partners didn’t really open their markets to us. They played another game ? mercantilism, featuring rampant global currency devaluation, consumption taxes called Value Added Taxes (VATs) that are tariffs by another name, massive subsidies to their industries, and industrial policies that favor their domestic supply chains.

In brief, the effect to the United States of this unbalanced trade has been:

  • Loss of >600,000 mfg. jobs from NAFTA
  • Loss of 3.2 million mfg. jobs between 2000 – 2010 from China’s entry into WTO
  • Loss of >60,000 mfg. jobs since Korea-US Agreement went into effect in 2012
  • Loss of an estimated 3.4 million U. S. service & call center jobs since 2000
  • Loss of an estimated 700,000 public sector jobs (2008-2013)
  • Racked up cumulative trade deficit of $12 trillion in goods (average $500 billion each year) since 1994

As a result, we now have the worst trade deficit in U. S. history, and we are off to even a higher deficit this year based on the trade figures released for January ($45.9 billion) and February ($47.1 billion). As a recent example of the effect of trade agreements on our total trade deficit, our trade deficit with Korea has nearly doubled in less than four years, increasing from $14.7 billion in 2012 to $28.4 billion in 2015. Proponents of KORUS promised that it would create 70,000 jobs and $10 billion in exports.

As mentioned in a previous article, proponents of the TPP aren’t even giving such rosy predictions. The Peterson Institute’s analysis of the TPP states: “…GDP is projected to fall slightly (-0.54 percent), employment to decline by 448,000 jobs…”

What are some of the ways the TPP could affect you or your business?

Buy American Act would essentially be made Null and Void: The worst effect would be to those businesses who sell to the government, whether it be local, state, or federal because under the TPP procurement chapter, the U.S. would have to agree to waive Buy America procurement policies for all companies operating in TPP countries. This means that all companies operating in any country signing the agreement would be provided access equal to domestic firms to bid on government procurement contracts at the local, state, and federal level. There are many companies that survived the recession and continue in business today because of the Buy American provisions for government procurement, especially defense and military. The TPP could be a deathblow for companies that rely on defense and military contracts. However, it would also affect procurement for infrastructure projects, such as bridges and freeways, as well as construction of local, state, or federal facilities.

Of course, this means that U. S. companies could bid on government procurement projects in TPP countries, but the trading benefit is miniscule. The U. S. government procurement market is 7X the size of current TPP partner countries (+550 billion vs. $55 -70 billion.) It is also highly unlikely that U. S. companies would be the low bidder against domestic companies in these TPP countries because of the vast difference in wages in countries such as Vietnam, where the average wage is 55 cents/hour. Past trade agreements has resulted in an average annual wage loss of 5.5% for full-time workers without college degrees, and U. S. wages have been stagnant for decades, growing by only about 2% per year since 2008. The result has been increased wage inequality from low to high wage earners.

Product Labeling could be Made Illegal: If you like to know if your food is safe, then you won’t like the fact that “Country of Origin,” “Non-GMO,” or “Organic” labeling could be viewed as a “barrier to trade” and thus be deemed illegal. According to Food & Water Watch, around 90% of the shrimp and catfish that Americans eat are imported. They warn, “The TPP will increase imports of potentially unsafe and minimally inspected fish and seafood products, exposing consumers to more and more dangerous seafood.” Many TPP countries are farm-raising seafood in polluted water using chemicals and antibiotics prohibited in the U. S. Farmed seafood from Malaysia, Vietnam, and China is being raised in water quality equivalent to U. S. sewers. Today, the FDA only inspects 2% of seafood, fruits and vegetables, and the USDA only inspects 4-5% of meat & poultry. Increased imports of food from TPP trading partners could swamp FDA and USDA inspections, so that even less is inspected.

TPP would Increase Immigration: If you are concerned about jobs for yourself or family members, then you won’t like the fact that the TPP increases “the number of L1 visas and the number of tourist visas, which can be used for business purposes.” Any service provider (phone service, security, engineers, lawyers, architects or any company providing a service) can enter into a TPP partner country and provide that service. Companies don’t have to hire Americans or pay American wages – they can bring in own workers and pay less than the American minimum wage.

TPP would Increase Job Losses in Key Industries: If you work in the automotive or textile industries, you may lose your job. The Center for Automotive Research projects a loss of 91,500 U. S. auto jobs to Japan with the reduction of 225,000 automobiles produced in the U. S. Also, the National Council of Textile Industries projects a loss of 522,000 jobs in the U. S. textile and related sectors to Vietnam.

TPP would Reduce Reshoring: Because TPP will reduce tariffs in trading partner countries, such as Vietnam, it will make the Total Cost of Ownership analysis to return manufacturing to America more difficult to justify. The high U. S. dollar has already diminished reshoring in the past year, so Harry Moser, Founder and President of the Reshoring Initiative, recently told me that “The combination of the high USD and TPP will reduce the rate of reshoring by an estimated 20 – 50%.”

Remember that the TPP is missing any provisions to address the mercantilist policies practiced by our trading partners: currency manipulation, Value Added Taxes that are both a hidden tariff and a hidden export subsidy, government subsidies/state owned enterprises, and “product dumping.”

 America is at a crossroads. We can either continue down the path of increasing trade deficits and increasing national debt by allowing anything mined, manufactured, grown, or serviced to be outsourced to countries with predatory trade policies. Or, we can forge a new path by developing and implementing a national strategy to win the international competition for good jobs, sustained economic growth and strong domestic supply chains. If you support the latter path, then add your voice to mine and millions of others in urging Congress not to approve the TPP in either the regular session before the Presidential election or the “lame duck” session after the election.

Tags:, , , , ,
Posted in Country of Origin, Inellectual Property, Jobs, Manufacturing, National security, Reshoring, Trade Policy | No Comments »

What Could be done about China’s Theft of Intellectual Property

Sunday, March 13th, 2016

Hardly a week goes by without a report of Chinese “hacking” or Intellectual Property Theft, so it was no surprise that a published analysis by CrowdStrike, a California-based cyber security company, revealed that China violated its cyber agreement with the United States the very next day after CNBC reported that President Obama and China’s President Xi Jinping agreed to not conduct cyber theft of intellectual property on Friday, September 25, 2015. President Obama said. “The United States government does not engage in cyber economic espionage for commercial gain, and today I can announce that our two countries have reached a common understanding on a way forward.” However, the U.S.-China agreement “does not prohibit cyber spying for national security purposes.”

It is interesting to note that the day before the announcement, September 24, 2015, Chet Nagle, a former CIA agent and current Vice President of M-CAM, penned an article in the Daily Caller, stating, “At FBI headquarters in July, the head of FBI counterintelligence, Randall Coleman, said there has been a 53 percent increase in the theft of American trade secrets, thefts that have cost hundreds of billions of dollars in the past year. In an FBI survey of 165 private companies, half of them said they were victims of economic espionage or theft of trade secrets — 95 percent of those cases involved individuals associated with the Chinese government.”

He blamed the corruption of Chinese government officials for the problem and stated that “President Xi Jinping has instituted a strict anti-corruption campaign. Regrettably, the campaign has focused on “tigers” — senior government officials — at the expense of eliminating the rampant corruption by the “flies” — officials at the provincial and local level. In any event, putting a dollar value on direct corruption does not address the totality of the costs. Business confidence and foreign direct investment in China are already falling because of the absence of the rule of law.”

He concluded, “China’s disregard of the rule of law should be the underlying driver for all discussions of commercial topics during the coming visit of China’s president. Lack of the rule of law is the most difficult challenge American enterprises face in China.”

In researching this topic, I found out that three years earlier, May 22, 2013, the bipartisan Commission on the Theft of American Intellectual Property of the U.S. International Trade Commission released a report. Dennis C. Blair, former Director of National Intelligence and Commander in Chief of the U.S. Pacific Command, and Jon M. Huntsman, Jr., former Ambassador to China, Governor of the state of Utah, and Deputy U.S. Trade Representative, were the Co-chairs of the Commission.

The day after the release, Forbes published an article about the report, stating that “China accounts for at least half – and maybe as much as 80 percent – of U.S. intellectual property theft.” The article briefly discussed the problem of China’s Intellectual Property theft and included quotes from the co-chairs, but did not go into any detail about the recommendations of the Commission.

The article did provide the link to the 100-page report, which I have since read. In view of the continuing problem, it is time to reconsider the key findings of the report, titled, “The Impact of International IP Theft on the American Economy”:

  • ”Hundreds of billions of dollars per year. The annual losses are likely to be comparable to the current annual level of U.S. exports to Asia—over $300 billion…”
  • Millions of jobs. If IP were to receive the same protection overseas that it does here, the American economy would add millions of jobs.
  • A drag on U.S. GDP growth. Better protection of IP would encourage significantly more R&D investment and economic growth.
  • The incentive to innovate drives productivity growth and the advancements that improve the quality of life. The threat of IP theft diminishes that incentive.

The report stated, “A core component of China’s successful growth strategy is acquiring science and technology. It does this in part by legal means—imports, foreign domestic investment, licensing, and joint ventures—but also by means that are illegal. National industrial policy goals in China encourage IP theft, and an extraordinary number of Chinese in business and government entities are engaged in this practice.”

The report stated that existing remedies are not keeping up with the problem because of:

  • Short product life cycles – “the slow pace of legal remedies for IP infringement does not meet the needs of companies whose products have rapid product life and profit cycles.”
  • Inadequate institutional capacity ? a shortage of trained judges in developing countries
  • China’s approach to IPR is evolving too slowly – “improvements over the years have not produced meaningful protection for American IP.”
  • Limitations in trade agreements? there are also significant problems in the WTO process that have made it impossible to obtain effective resolutions. “Bilateral and regional free trade agreements are not a panacea either.”
  • Steps undertaken by Congress and the administration are inadequate.

The Commission recommended short-term, medium-term, and long-term remedies. The short-term measures are immediate actions that are largely regulatory or made effective via executive order and include the following:

  • Designate the national security advisor as the principal policy coordinator for all actions on the protection of American IP.
  • Provide statutory responsibility and authority to the secretary of commerce to serve as the principal official to manage all aspects of IP protection.
  • Strengthen the International Trade Commission’s 337 process to sequester goods containing stolen IP.
  • Empower the secretary of the treasury, on the recommendation of the secretary of commerce, to deny the use of the American banking system to foreign companies that repeatedly use or benefit from the theft of American IP.
  • Increase Department of Justice and Federal Bureau of Investigation resources to investigate and prosecute cases of trade-secret theft, especially those enabled by cyber means.
  • Consider the degree of protection afforded to American companies’ IP a criterion for approving major foreign investments in the United States under the Committee on Foreign Investment in the U.S. (CFIUS) process.
  • Enforce strict supply-chain accountability for the U.S. government.
  • Require the Securities and Exchange Commission to judge whether companies’ use of stolen IP is a material condition that ought to be publicly reported.
  • Enforce strict supply-chain accountability for acquisitions by U.S. government departments and agencies by June 1, 2014, and work to enhance corporate accountability for the IP integrity of the supply chain.

The Commission made the following medium term recommendations to build a more sustainable legal framework to protect American IP that Congress and the administration should take:

  • Amend the Economic Espionage Act (EEA) to provide a federal private right of action for trade-secret theft. If companies or individuals can sue for damages due to the theft of IP, especially trade secrets, this will both punish bad behavior and deter future theft.
  • Make the Court of Appeals for the Federal Circuit (CAFC) the appellate court for all actions under the EEA. The CAFC is the appellate court for all International Trade Commission cases and has accumulated the most expertise of any appellate court on IP issues. It is thus in the best position to serve as the appellate court for all matters under the EEA.
  • Instruct the Federal Trade Commission (FTC) to obtain meaningful sanctions against foreign companies using stolen IP. Having demonstrated that foreign companies have stolen IP, the FTC can take sanctions against those companies.
  • Strengthen American diplomatic priorities in the protection of American IP. American ambassadors ought to be assessed on protecting intellectual property, as they are now assessed on promoting trade and exports. Raising the rank of IP attachés in countries in which theft is the most serious enhances their ability to protect American IP.

The more idealistic long-term recommendations are:

  • Build institutions in priority countries that contribute toward a “rule of law” environment in ways that protect IP.
  • Develop a program that encourages technological innovation to improve the ability to detect counterfeit goods.
  • Ensure that top U.S. officials from all agencies push to move China, in particular, beyond a policy of indigenous innovation toward becoming a self-innovating economy.
  • Develop IP “centers of excellence” on a regional basis within China and other priority countries.
  • Establish in the private, nonprofit sector an assessment or rating system of levels of IP legal protection, beginning in China but extending to other countries as well.

Of particular interest is the mention in the report that an annual survey in late 2012 of member companies of the American Chamber of Commerce in the People’s Republic of China “over 40% of respondents reported that the risk of data breach to their operations in China is increasing, and those who indicated that IP infringement has resulted in “material damage” to China operations or global operations increased from 18% in 2010 to 48% in 2012,” and that “The longer the supply line, the more vulnerable it is to IP theft.”

The risk of Intellectual Property is one of the major reasons many companies are returning manufacturing to America through reshoring. This is also why I urge the inventors that are part of the San Diego Inventors Forum to avoid going to China if at all possible, and if they have to go to China to meet their target Bill of Material cost, they should never source all of the parts of their product with one vendor. Otherwise, they are at risk of being victimized by their Chinese vendor stealing their IP and getting a counterfeit version of their product on the market first.

In conclusion, “The Commission considered three additional ideas for protecting the intellectual property of American companies that it does not recommend at this time.” The following one of the three is particularly interesting to me because of the enormous trade deficits we have with China:

“Recommend that Congress and the administration impose a tariff on all Chinese-origin imports, designed to raise 150% of all U.S. losses from Chinese IP theft in the previous year, as estimated by the secretary of commerce. This tariff would be subject to modification by the president on national security grounds.”

“The Commission is not prepared to make such a recommendation now because of the difficulty of estimating the value of stolen IP, the difficulty of identifying the appropriate imports, and the many legal questions raised by such an action under the United States’ WTO obligations. If major IP theft continues or increases, however, the proposal should be further refined and considered.”

What is outrageous to me is that it is obvious to me that none of the short-term, medium-term or long-term recommendations have been implemented or we would not still have the serious problem of cyber espionage and Intellectual Property Theft three years later.

Supporters of developments in China “essentially argue that when China begins producing its own intellectual property in significant quantities, the country’s own entrepreneurs and inventors will put pressure on political and Communist Party leaders to change the laws and improve IP protections.” Since China has the stated goal of becoming the superpower of the 21st Century and is Intellectual Property Theft is one of their tools to achieve this goal, I do not feel that this will ever happen.

To me, the most important conclusion of the report is “If the United States continues on its current path, with the incentives eroding, innovation will decline and our economy will stagnate. In this fundamental sense, IP theft is now a national security issue.” It will be interesting to see if the next president and the next Congress we elect will have the courage to play hardball with China by implementing some of the recommendations of the Commission.

Tags:, , , , ,
Posted in Inellectual Property, Innovation, Manufacturing, National security, Trade Policy | No Comments »

Is Reshoring Increasing or Declining?

Thursday, January 21st, 2016

In December, two conflicting reports were released, one by A.T. Kearney and one by the Boston Consulting Group. The A. T. Kearney report states that reshoring may be “over before it began”, and the Boston Consulting Group report states that it is increasing. Why the difference in opinion and who is right?

This was the second report by A. T. Kearney, in which their “U.S. Reshoring Index shows that, for the fourth consecutive year, reshoring of manufacturing activities to the United States has once again failed to keep up with offshoring. This time the index has dropped to –115, down from –30 in 2014, and it represents the largest year-over-year decrease in the past 10 years.”

In fact they conclude that “the rate of reshoring actually lagged that of offshoring between 2009 and 2013, as the growth of overall domestic U.S. manufacturing activity failed to keep pace with the import of offshore manufactured goods over the five-year period. The one exception was 2011.”

The authors of the A. T. Kearney report identify the two main factors contributing to the drop in the reshoring index to be “lackluster domestic manufacturing growth and the resilience of the offshore manufacturing sector.”

With regard to the lackluster domestic manufacturing, the report states that data from the U. S. Bureau of Economic Analysis predicted that U. S. manufacturing gross output would shrink by 3.6% through the end of 2015 based on data through November [December data not available.]

On the other hand, the Boston Consulting Group survey results showed that “Thirty-one percent of respondents to BCG’s fourth annual survey of senior U.S.-based manufacturing executives at companies with at least $1 billion in annual revenues said that their companies are most likely to add production capacity in the U.S. within five years for goods sold in the U.S., while 20% said they are most likely to add capacity in China…The share of executives saying that their companies are actively reshoring production increased by 9% since 2014 and by about 250% since 2012. This suggests that companies that were considering reshoring in the past three years are now taking action. By a two-to-one margin, executives said they believe that reshoring will help create U.S. jobs at their companies rather than lead to a net loss of jobs.”

The difference of opinion is based on different data. A. T. Kearney notes that “The manufacturing import ratio is calculated by dividing manufactured goods imports from 14 Asian markets [list of countries] by U. S. domestic gross output of manufactured goods. The U. S. reshoring index is the year-over-year change in the manufacturing ratio.”

In contrast, the Boston Consulting Group data is based on “an annual online survey of senior-level, U.S.-based manufacturing executives. This year’s survey elicited 263 responses. The responses were limited to one per company…Respondents are decision makers in companies with more than $1 billion in annual revenues, across a wide range of industries.”

“These findings underscore how significantly U.S. attitudes toward manufacturing in America seem to have swung in just a few years,” said Harold L. Sirkin, a BCG senior partner and a coauthor of the research, which is part of BCG’s ongoing series on the shifting economics of global manufacturing, launched in 2011. “The results offer the latest evidence that a revival of American manufacturing is underway.”

The BCG survey identified such factors “as logistics, inventory costs, ease of doing business, and the risks of operating extended supply chains” are driving decisions to bring manufacturing back to the U.S. The primary reason for 76% of respondents reshoring production of goods to be sold in the U.S. was to “shorten our supply chain…while 70% cited reduced shipping costs and 64% said “to be closer to customers.”

The reasons cited by the BCG survey are consistent with the case studies that the Reshoring Initiative has captured, but the reshoring trend over the last few years has also been driven by a range of factors including rising offshore labor rates, especially in China, as well as the increased use of Total Cost of Ownership analysis to quantify the hidden costs of doing business offshore. The threat of Intellectual Property theft, cost of inventory (space to store and cost to buy larger size lots to get the “China price,) and quality/warranty/rework are also cited frequently. Longer delivery, cost and time of travel to visit offshore vendors, transportation costs, and communication problems also influence the decision to reshore.

About 60% of companies ignore these hidden costs and only look at wage rate, quoted piece price or at best, landed cost. Because of inaccurate data, many companies make the decision to offshore on the basis of faulty assumptions. The reality is that many companies are saving less than they expected, and in some cases, the hidden costs exceed the anticipated cost savings.

As an authorized speaker for Harry Moser’s Reshoring Initiative for the past five years, I have been conducting my own informal surveys of manufacturers that I meet at trade shows and conferences. Most of these companies are Tier 2 or 3 suppliers of assemblies, sub-assemblies and component parts. Each year, more and more companies have told me that they are benefitting from reshoring.

At the trade shows I attended last year and conducted my informal survey, I didn’t meet a single company that hadn’t gotten new business or recaptured an old customer because of reshoring. I believe that there is a great deal more reshoring going on than A. T. Kearney or even the Boston Consulting Group can quantify because it isn’t a whole product. It is an assembly, subassembly, or component part, such as metal stamped part, machined parts, sheet metal fabricated parts and assemblies, plastic and rubber molded parts, printed circuit boards, etc.

I now have slides for 300 case studies of companies that have reshored in the last six years provided to me by the Reshoring Initiative to use in my presentations. I can tailor my presentation to include slides for particular industries or geographical location. For example, when I spoke at the Lean Accounting Summit in Jacksonville, Florida in October, I shared case studies of companies that had reshored to the Southeast and when I spoke at the Design2Part show in Pasadena later that month, I shared case studies for companies that had reshored to California.

The Reshoring Initiative estimates that “if all companies used Total Cost of Ownership (TCO) analysis, 25% of the offshoring would come back.” Their data reveals that about 100,000 manufacturing jobs have already been reshored in the last six years. Harry Moser states, “Excess offshoring represents an economic inefficiency that can be corrected at low cost. It is less expensive to educate companies than to incentivize them.”

During a recent conversation with Harry Moser, he said, “The economic bleeding due to increasing offshoring has stopped. The rate of new reshoring is now equal to the rate of new offshoring. The challenge is now to reshore the 3 to 4 million manufacturing jobs that are still offshored.” He provided me with the following chart to use in the presentations I gave last fall:

  Manufacturing Jobs / Year
  2003 2013 % Change Feasible 2016
New offshoring * ~150,000* 30-50,000* – 70% 20,000
New reshoring    2,000* 30-40,000** + 1,500 % 70,000
Net reshoring -148,000 ~0 -100% +50,000

*Estimated / ** Calculated

In the past, corporate cultures, supply chain reward systems, and investment have been heavily focused on offshoring. Many companies followed each other offshore in what Harry and I call “herd behavior.” We are endeavoring to change the mindset from offshoring is cheaper to sourcing domestically may be the better choice.

Another way would be to change the way buyers/purchasing agents in supply chain groups are being evaluated and rewarded on the basis of their success in achieving purchase price variance; i.e., selecting sources on the basis of the cheapest price. Chief Financial Officers need to allow their company’s supply chain department to utilize expenses in the other accounting categories that need to be taken into consideration in doing a Total Cost of Ownership analysis, such as transportation costs, travel and communication costs related to the supply chain, and the cost of quality problems related to rejected parts and reworking of salvageable parts.

Transforming to the value stream method of Lean Accounting would also facilitate being able to do a Total Cost of Ownership analysis more than Standard Cost Accounting because all of the costs related to that value stream are put into the category of Conversion costs and not put in the separate accounting categories of standard cost accounting.

The reality is that companies will only bring back the majority of offshored work if the economics of producing in the U.S. improve. The actions needed for more reshoring are the same as needed for manufacturing in general. These include developing a national manufacturing strategy that encompasses skilled workforce training, corporate tax reform, regulatory reform, and Border Adjustable Taxes (aka VATs) while addressing the predatory mercantilist practices of other countries with regard to currency manipulation, product dumping, and government subsidies.

Let’s return to the question of the status of the reshoring trend. The government keeps no related data. ATK tries to measure reshoring indirectly by measuring imports. It would be better to measure the actual phenomenon. BCG uses surveys of reshoring plans, but companies’ actions often differ from plans. The Reshoring Initiative counts the actual reshoring cases and jobs reported in the media and privately by companies. Readers can help resolve the dispute by reporting their cases of successful or failed reshoring to Harry Moser or to me, so I can write about them in future articles.

Tags:, , ,
Posted in Economic Development, National security, Reshoring | No Comments »

CPA Releases Competitiveness Strategy for the United StatesCPA Releases Competitiveness Strategy for the United States

Friday, November 20th, 2015

For several years, organizations and elected representatives in Congress have proposed developing a national manufacturing strategy. For example, the Information Technology& Innovation Foundation (ITIF) released a report, “The Case for a National Manufacturing Strategy,” in April 2011 and the Alliance for American Manufacturing has repeatedly put forward a “Plan to Save Manufacturing,” calling for a national manufacturing strategy to reverse the decline in U.S. manufacturing and the good jobs that come with it. Bills sponsored by Illinois Rep. Dan Lipinski (D) have even passed the House of Representatives, but have died in the Senate.

On November 11th, the Coalition for a Prosperous America (CPA) released “A Competitiveness Strategy for the United States – America at a Crossroads,” which addresses other sectors of our economy in addition to manufacturing.

“America needs to start winning again,” said Michael Stumo, CEO of CPA. “That is why the mission of the Competitiveness Strategy is to:

‘Win the international competition for good jobs, sustained real economic growth and prosperity with a national strategy to counter foreign mercantilism, balance trade and grow strong domestic supply chains.’”

“Across the USA, localities and states employ plans to attract jobs,” said Brian O’Shaughnessy, CPA Chief Co-Chair and Chairman of Revere Copper Products. “Other countries have sophisticated national strategies to acquire industries and bring good paying jobs to their countries. The USA has no comprehensive national strategy for domestic production and good paying jobs to guide trade negotiators and administration officials.”

CPA’s Competitiveness Strategy argues that:

The United States is losing an economic competition against other nations whose mercantilist strategies are destroying our manufacturing jobs, critical industries, our standard of living, our national security, the security of our food supply, and our children’s futures.

The threat to the U. S. economy and national security is grave. Other trading nations are using comprehensive strategies to import jobs across all economic sectors, but are particularly focused on strategically significant technologies and industries. American companies in these sectors face not only wide-ranging mercantilist practices and non-tariff trade barriers such as currency manipulation, tariffs and subsidies, but also much more sophisticated and specific strategies aimed at identifying, acquiring, or otherwise controlling critical technologies.

CPA’s strategy holds out the promise that the U. S. is in control of its own destiny and can re-assert itself as a great manufacturing and producing nation with a rising standard of living for all. We can develop and implement a comprehensive strategy that retains and reinforces our leadership in innovation, locates investment and production in the United States, and raises employment by creating good paying jobs.

The ultimate mission of the strategy is to win the international competition for good jobs and sustained economic growth. The mission recognizes we are in competition with other countries. The Competitiveness Strategy includes nineteen action steps focused upon three interrelated goals:

  1. Identifying and countering foreign mercantilist strategies that grow their economies at the expense of other countries through achieving a persistent trade surplus
  2. Balancing the national trade deficit
  3. Growing domestic supply chains

“All three goals are interrelated and must be pursued together,” continued Stumo. “The President rightfully created the National Network for Manufacturing Innovation to grow domestic supply chains, but the effort cannot succeed unless we combat powerful foreign tactics to take those industries away. Further, a new effort to counter foreign mercantilism and trade cheating is essential, but must have the goal of balancing trade to be fully effective.”
“Additionally, balancing trade is essential, but merely exporting raw materials is insufficient. American must grow and retain a diverse array of industries that add value to our products and create good jobs, with special attention paid to advanced and critical industry supply chains,” Stumo concluded.

CPA’s competitiveness strategy shown below is succinct, yet comprehensive:

“Identify and counter foreign mercantilist strategies that grow their economies at the expense of other countries through achieving a persistent trade surplus

  1. End both currency exchange rate imbalances and the accumulation of excessive US dollar holdings by non-US public and private entities.
  2. Impose offsetting tariffs to neutralize foreign government subsidies to industries and supply chains that compete with ours.
  3. Counter foreign government policies that force offshoring by conditioning access to their markets on transfers of technology, research facilities and/or production to their countries, as well as compliance with export performance and domestic content requirements, while their exporters have access to US markets without these conditions.
  4. Ensure that foreign greenfield investments in the US and acquisitions of existing US companies provide a clear “net benefit” to the US with special scrutiny in cases of state influenced foreign entities.
  5. Protect US food security from foreign government tactics to seize markets.

Balance trade

  1. Offset cumulative trade deficits of recent decades and excessive accumulations of dollar reserves through sustained trade surplus to ultimately achieve a long term overall trade balance.
  2. Insure that the composition of trade includes a substantial trade surplus in high value added and advanced manufactured goods.
  3. Make the US workforce more cost competitive by promoting fair pay, rising living standards and safe working conditions for workers everywhere.
  4. Reduce US producers’ trade disadvantage through tax reform which finances the reduction of payroll taxes and health insurance costs with a border adjustable consumption tax in a revenue and distribution neutral manner.
  5. Lower corporate tax rates and end corporate inversion and profit shifting tax avoidance by taxing the income of unitary business groups, whether domestic or foreign, based upon proportion of global sales in the US.

Grow Domestic Supply Chains

  1. Preserve and develop domestic manufacturing and agricultural supply chains to maximize value added production in the US.
  2. Develop, build and maintain a world-class land, water, air, communications and energy infrastructure.
  3. Safeguard our military strength and national security by insuring that critical technologies, weapons & IT components are developed and manufactured in America by American controlled companies.
  4. Develop, commercialize and retain strategic and economically significant advanced technology and grow their manufacturing supply chains in the US.
  5. Increase public support for, and incentives for private investment in, basic and applied research, infra-technologies and new product and process technologies.
  6. Continually raise the competitiveness of American workers by improving Science, Technology, Engineering and Math (STEM) education available at all levels, systematically enhance lifelong learning for existing workers, and fostering a national system of apprenticeship and paid internships through collaborative public-private endeavors that are connected to actual opportunities in the labor market.
  7. Raise the competitiveness of small and medium sized domestic enterprises by increasing long-term private sector financing, the sharing of research on common issues and the diffusion of new technologies and production methods.
  8. Preserve our right to adopt and enforce domestic policies that insure the quality of our food and goods, and protect the health, safety and general welfare of our citizens without restrictions from international trade agreements.
  9. Ensure that domestic manufacturing and agriculture benefit fully from an expanded supply of low cost US produced energy”

Anyone involved in efforts to revitalize American manufacturing already has a bookshelf full of books, studies, and reports containing recommendations on a national manufacturing strategy. My book, Can American Manufacturing Be Saved? Why we should and how we can has a chapter on “How Can We Save American Manufacturing?” that contains a summary of the recommendations of many organizations as well as my own recommendations, which I incorporate into articles and presentations whenever possible. As chair of the California chapter of CPA, I plan to incorporate this competitiveness strategy into future articles and presentations whenever possible.

The brilliance of CPA’s strategy is that it is not limited to manufacturing and is not a “to do list” of actions to take. The Competitiveness Strategy will work best when pursued as a whole. The three objectives are interrelated because, for example, we cannot balance trade without growing domestic supply chains to produce more, and add more value in the U. S. We cannot grow domestic supply chains unless we neutralize foreign mercantilism (trade cheating) that offshores otherwise competitive industries that we started and developed in the U. S. We cannot address foreign mercantilism without the guidance of a balanced trade objective.

Businesses must have a strategic plan to start and grow. This strategic plan guides the business with regard to product development, finance, marketing, production, procurement, etc. Many other countries have an economic strategy to grow their economy. A country’s strategy guides their economic, fiscal, trade, innovation, finance and monetary policy, so that they all work together to enhance their competitiveness as a nation.

The United States has no comprehensive strategy ? just a hodgepodge of laws and rules. Trade negotiators have had no strategic plan to guide them, and neither do the administrative agencies relevant to manufacturing, agricultural, and use of natural resources. The United States needs a comprehensive competitiveness strategy that clearly expresses exactly what we want to achieve for our country… not for an industry or special interest… but our country as a whole.

We do not have to “keep reinventing the wheel.” It is time for our leaders to “stop fiddling while Rome burns” and show some real leadership. Action, not lip service is what we need now!

Tags:, , , , ,
Posted in Economic Development, Economy, Jobs, Manufacturing, National security, Reshoring, Trade, Trade Policy | No Comments »

Defense Department’s Globalization of Supply Chain Threatens our National Security

Tuesday, July 21st, 2015

Over three years ago, I wrote an article (May 21, 2012), about the release of the Senate Armed Services Committee report on counterfeit parts in the Department of Defense supply chain. The Committee had found over 1,800 cases of counterfeit parts in just the Air Force C-130J and C-27J cargo plane, as well as assemblies used in the Navy’s SH-60B helicopter.

To address weaknesses in the defense supply chain and to promote the adoption of aggressive counterfeit avoidance practices by the Department of Defense and the defense industry, an amendment to the National Defense Authorization Act for Fiscal Year 2012 was adopted in the Senate and signed by President Obama.

Instead of implementing the requirements of the Act, it appears that DOD “has entered a new phase of its centuries-long development, the latest characterized by globalization of supply chains and the inability of U.S. defense contractors and laboratories to drive technological change” according to Richard McCormack, publisher and producer of the Manufacturing & Technology News, May 20, 2015 edition.

In this issue, McCormack reported on comments made by Bill Lynn, CEO of Finmeccanica North America and former Deputy Secretary of Defense from 2009 until 2011, at the April 29, 2015 meeting of the Center for Strategic and International Studies in Washington, D.C.

The defense sector and the U.S. military have “moved from being a net exporter of technology to a net importer,” Lynn stated, adding “When their R&D budgets are combined to total a scant $3 billion (or only 1.6 percent of revenue), the five biggest defense contractors — Boeing, Lockheed, Raytheon, L3 and Northrop — would not even make the list of the top 20 global companies that invest in R&D.”

Lynn told the meeting, “Those are things where the commercial industrial base is stronger than the defense industrial base and in many ways the key to maintaining our future [defense] technology edge is to be able to import those technologies into our defense industrial base… Since many of the underlying technologies now reside outside of the United States, DOD has to figure out how to deal with foreign corporations and state-owned enterprises that hold the keys to its success.”

McCormack noted, “The Department of Defense and its major contractors are now dependent on foreign manufacturers for many of the military’s most advanced weapons systems…The defense industry is a shadow of its former self, representing less than 3.5 percent of the U.S. economy, a position that continues to decline as defense budgets reach new lows with no chance of them growing faster than the economy.”

Lynn commented that ” DOD is slowly catching up to the structural change caused by globalization of technology and supply chains. It is wrestling with the regulatory and procurement systems it has in place to monitor and conduct business with foreign suppliers, but it has little time to waste.”

One of these regulations to which he referred is the Buy American Act that was passed by Congress in 1933. It required the U.S. government to give preferential treatment to American producers in awarding of federal contracts. The Act restricted the purchase of supplies that are not domestic end products. For manufactured products, the Buy American Act used a two-part test: first, the article must be manufactured in the U.S., and second, the cost of domestic components must exceed 50 percent of the cost of all its components.

After the end of the Cold War and the subsequent Gulf War, the provisions of the “Buy American Act” were eased to allow purchasing off the shelf commercial parts (COTS) from foreign countries by the Defense Department and other government agencies if they met the same fit and function of parts made to strict military specifications. Previously, parts, assemblies, and systems were required to be substantially made in the United States or in a NATO country, such as Great Britain, France, and Germany.

In the early 1990s, most commercial parts were still being made in the United States, with some outsourcing to the Philippines, Hong Kong, and Singapore, so this change was pretty safe. Permitting commercial parts to replace Mil. Spec. parts probably drove out of business the small companies that catered exclusively to the military and that provided traceability per Military Specifications for parts supplied to government agencies, military contractors, and subcontractors. This was all done in the name of cost savings. Now, however, most commercial electronic components and microchips are fabricated in China.

The President has authority to waive the Act in response to the provision of reciprocal treatment to U.S. producers. Under the 1979 GATT Agreement on Government Procurement, the U.S.-Israel Free Trade Agreement, the U.S.-Canada Free Trade Agreement, the North American Free Trade Agreement, the Central American Free Trade Agreement, and the Korea Free Trade Agreement, access to government procurement by certain U.S. agencies of goods for the other parties to these agreements is granted.

If the Trans-Pacific Partnership Agreement is approved, the procurement chapter would require that all companies operating in any country signing the agreement be provided access equal to domestic firms to U.S. government procurement contracts over a certain dollar threshold. To meet this requirement, the U.S. would have to agree to waive Buy America procurement policies for all companies operating in the 10 other countries.

In fact, it was reported by Reuters in January 2014 that “The Pentagon repeatedly waived laws banning Chinese-built components on U.S. weapons in order to keep the $392 billion Lockheed Martin Corp F-35 fighter program on track in 2012 and 2013, even as U.S. officials were voicing concern about China’s espionage and military buildup.

Lynn doesn’t seem to think that there is anything dangerous in allowing more foreign participation in the defense industry, saying “that changing perceptions about foreign involvement in the defense industry are similar to what happened in the U. S. auto sector…Americans and their representatives in Congress were skeptical about foreign nameplates. But as foreign auto companies started building technologies in the United States and hiring American workers, the tide turned…The politicians care about the jobs, they a\care less about the nameplate.”

It is incomprehensible to me to compare what happened to the U. S. auto industry to what is happening to the U. S. defense industry. The whole purpose of the defense industry is to protect our national sovereignty and national security. How can anyone in their right mind want to make our defense supply chain vulnerable to the foreign country, namely China, which has a written plan to replace us as the world’s super power? The Chinese are never going to bu9od plants in the U. S. to make parts for our defense supply chain. They have just stolen our technology to build up their own military power as evidenced by the “uncanny” similarity of China’s newest stealth fighter, the J-31, as well as the Chengdu J-20 fighter jet, to the F-35 Lightning II advanced fighter jet.

Does anyone believe that we will get any parts and assemblies need by our defense industry when China has decided we are so weak that we cannot stop their aggression in Asia. We are not even safe to have parts sourced in Taiwan, South Korea, the Philippines, Malaysia, Indonesia, or Vietnam. These countries would all be targets for takeover by China once they lose their fear and respect for U. S. naval and air power.

When President Eisenhower warned us about the military-industrial complex, little did he know that the military-industrial would be superseded by the consumer-importer complex, which has led to the virtual demise of the military-industrial complex.

Congress must act to strengthen the Buy American Act, not weaken it, eliminate the incentives for offshoring, and provide incentives for bringing manufacturing back to America. We must protect the supply chain for defense and military products and systems, so that Defense Department can fulfill its primary mission of defending our country. If we don’t, we are setting ourselves up for eventual defeat by our future enemies.

 

Tags:, , ,
Posted in Manufacturing, National security, Outsourcing | 1 Comment »

International Corporate Elite Steamrolls Trade Promotion Authority Through Senate!

Tuesday, May 26th, 2015

Late Friday evening, May 22, 2015, the Senate voted to pass the Trade Promotion Authority (H.R. 1314) by a vote of 62 to 37 to give President Obama the authority to “fast-track” trade agreements through 2018, with an extension to 2021 possible. If this legislation also passes the House, this would mean that the Trans-Pacific Partnership Agreement (TPP) and the Trans-Atlantic Agreement may be negotiated and signed without any amendments by Congress and with only a majority vote rather than the supermajority vote required for treaties under the Constitution.

Of the Republican senators, 54 voted yes, four voted no and one did not vote. Fourteen Democrats joined the majority of Republicans in voting yes. According to the Roll Call, they are: Bennet (CO), Cantwell (WA), Cardin (MD), Coons (DE), Feinstein (CA), Heitkamp (ND), Kaine (VA), McCaskill (MO), Murray (FL) Shaheen (NH), Warren (VA), and Wyden (OR). The four Republicans who voted no are: Collins (ME), Paul (KY), Sessions (AL), and Shelby (AL).

Nearly every Democrat or Democrat-leaning organization from unions to the Sierra Club opposed the Trade Promotion Authority, so those fourteen Democrat Senators turned their back on their constituencies and the American working class they claim to support to follow lock-step with the Republicans they accuse of being in the pocket of “big business,” i.e. the large multinational corporations that comprise the membership of the U.S. Chamber of Commerce, the National Association of Manufacturers, etc.

There were over 100 amendments proposed, but only ten were allowed to reach the floor for a vote. Three were rejected for discussion or a vote because they were ruled as not being not germane to the topic: Inhofe (R-OK) # 1312 (AGOA), Shaheen (D-NH) SA #1227 (small business), and McCain (R-AZ) #1226 (catfish).

The Hatch (R-UT) (substitute) amendment #1221 was approved without any description or discussion by a vote of 62 yes to 37 no.

The Flake (R-AZ) amendment #1243 to strike the extension of the Trade Adjustment Assistance program (TAA) failed 35 yes to 63 no. The Trade Adjustment Assistance was originally a separate bill and was added to the Trade Promotion Authority to “sweeten” the deal to gain Democrat votes. Trade Adjustment Assistance is a federal program to reduce the damaging impact of imports. The current program features four components for workers, firms, farmers, and communities.

The Brown (D-OH) amendment #1251 purpose was to require the approval of Congress before additional countries may join the Trans-Pacific Partnership Agreement because the TPP is a “docking” agreement in which other countries may be added after it is signed and in effect. In his comments in support of this amendment, Senator Brown specifically mentioned the need for Congress to approve the addition of China to the Agreement. Unfortunately, the amendment failed by a vote of 47 yes to 52 no.

The Stabenow-Portman amendment #1299, whose purpose was, “To make it a principal negotiating objective of the United States to address currency manipulation in trade agreements,” failed by a vote of 48 yes to 51 no.

The Hatch amendment #1411 was agreed to by a vote of 70 yes to 29 No without any description or discussion.

Two Amendments had already been considered on May 21st:

  • Lankford SA 1237 passed by a vote of 92 to 0 to establish consideration of the conditions relating to religious freedom of parties to trade negotiations as an overall negotiating objective of the United States.
  • Brown SA #1242 failed by a vote 41 to 45 to restore funding for the trade adjustment assistance program to the level established by the Trade Adjustment Assistance Extension Act of 2011

Of equal importance, the Warren amendment #1327 failed to pass by a vote of 39 Yes to 60 No. Its purpose was “To prohibit application of the trade authorities procedures to an implementing bill submitted with respect to a trade agreement that includes investor-state dispute settlement” [ISDS].

This is the chapter of the TPP that allows foreign corporations to bypass the domestic legal system to use to fight laws they don’t like. International Tribunals, not U.S. courts, would decide on lawsuits between the U. S and “investor” companies in member countries. Foreign “investors” could file lawsuits against city, state, and federal agencies for laws and regulations they feel infringe on their “expected future profits.” They can also sue for compensation for the loss of these “expected future profits.”

In her comments to introduce the amendment, Senator Elizabeth Warren mentioned that over 100 law professors had sent a letter to Congress and the Obama administration urging them to not include the ISDS in the TPP. I discovered that she was quoting from the “Analysis of Leaked Trans-Pacific Partnership Investment Text by Lori Wallach of the Citizen’s Trade group” that was released on Wednesday, March 25, 2015. You can download the leaked chapter at https://wikileaks.org/tpp-investment/

This 13-page analysis includes this paragraph: “A March 2015 letter signed by 139 U.S. law professors urges congressional leaders and the Obama administration ‘to protect the rule of law and our nation’s sovereignty by ensuring ISDS is not included” in the TPP, stating, “ISDS threatens domestic sovereignty by empowering foreign corporations to bypass domestic court systems and privately enforce terms of a trade agreement. It weakens the rule of law by removing the procedural protections of the justice system and using an unaccountable, unreviewable system of adjudication.’ A May 2012 letter signed by former judges, law professors and other prominent lawyers from TPP nations warns: ‘the foreign investor protections included in some recent Free Trade Agreements (FTA) and Bilateral Investment Treaties (BIT) and their enforcement through Investor-State arbitration should not be replicated in the TPP. We base this conclusion on concerns about how the expansion of this regime threatens to undermine the justice systems in our various countries and fundamentally shift the balance of power between investors, states and other affected parties in a manner that undermines fair resolution of legal disputes.”

This analysis is well worth reading to become fully informed of the dangers of international tribunals adjudicating cases instead of our domestic legal system. Two of the most dangerous features of the ISDS chapter are:

  • “Foreign investors alone would be granted access to extrajudicial tribunals staffed by private sector lawyers who rotate between acting as “judges” and representing corporations in cases against governments, posing major conflicts of interest.”
  • “Foreign tribunals would be empowered to order governments to pay unlimited cash compensation out of national treasuries.”

Senator Warren also mentioned that even the CATO Institute, a champion of free trade, had recommended removal of ISDS from the Trade Promotion Authority legislation. The report she referenced is Free Trade Bulletin No. 57, “A Compromise to Advance the Trade Agenda: Purge Negotiations of Investor-State Dispute Settlement,” by Daniel J. Ikenson dated March 4, 2014. The CATO Institute is a well-known American libertarian think tank, so its recommendations should have had some influence on Republicans in the Senate, but evidently did not. Instead, the vast majority of them chose to follow their cue from the international corporate elite behind this treaty.

Ikenson wrote that there are “practical, economic, legal, and political reasons to expunge ISDS from current trade negotiations.” He presented “Eight Good Reasons to Drop ISDS from TPP and TTIP, which you can read in full at the above link.

Since there was very little information on the Trans-Pacific Partnership Agreement in the major media prior to its introduction in the Senate and the failure of the first cloture vote on May 12th, it is imperative that freedom-loving organizations make Democrat and Republican Representatives in the House aware of the facts about the damage the TPP would do to our country.

America now stands at a crossroads, whether Americans will remain in control of their destiny or will be forced to bow before foreign tribunals and have even more of their jobs shipped overseas. If we are to protect our national sovereignty and our jobs, we must stop this legislation in the House by flooding their switchboards!

Members of the manufacturing task force of the California chapter of the Coalition for a Prosperous America of which I am chair have done their part by visiting the offices of all 33 of the southern California Representatives in the past year. The final hour is near. Let your Representative hear your voice! If you don’t know who your Representative is, click here.

Posted in Jobs, Manufacturing, National security, Trade Policy | 1 Comment »

What would be the Impact of the Trans Pacific Partnership Agreement?

Monday, April 20th, 2015

Last Thursday, Senators Hatch, Wyden, and Ryan introduced “The Bipartisan Congressional Trade Priorities and Accountability Act of 2015,” which is the Trade Promotion Authority bill that would grant President Obama “fast track” authority for the Trans Pacific Partnership Agreement.

The TPP agreement has been in negotiation since 2010 between the United States and 11 other countries around the Pacific Rim: Australia, Brunei, Canada, Chile, Japan, Malaysia, Mexico, New Zealand, Peru, Singapore, and Vietnam. The TPP would cover 792 million people and 40% of world’s economic activity. It is a “docking agreement” so other countries could be added, and India, China, and Korea have expressed interest in joining the TPP.

There has been no involvement by Congress in the writing of the Agreement; instead, 600 corporate advisors have worked with the U. S. Trade Representative and his staff to write the more than 1,000 pages of the Agreement. Members of Congress did not even have access to view the Agreement until last year, and they cannot take any staff with them and are not allowed to take pen, pencil, paper, or a camera when they go view it at the U. S. T. R.’s office.

This Act would give Constitutional power over trade to the President and take it away from Congress. It would allow the Executive Branch to conclude negotiations and sign the Agreement before a vote by Congress. It allows only 45 days for committee analysis and only 15 days to bring it up for floor vote. It allows only 20 hours of debate by Congress and eliminates amendments, filibuster, and cloture. It requires only simple majority vote in the Senate and House whereas the U.S. Constitution Article 1, Section 8 Treaty clause requires 2/3 vote of Senate. The TPP would remain in effect until 2018, but could be extended to 2021.

What is missing in the TPP

 The TPP does not address any of the “predatory mercantilist” actions that our current trading partners are using that have created the enormous trade deficit that I wrote about a few weeks ago. These policies are: currency manipulation, “border adjustable” taxes called Value Added Taxes (VATs), which are a tariff by another name, government subsidies for State-Owned Enterprises, and “product dumping” by manufacturers in one country at below their cost to produce to destroy competition in another country.

“Over 20 countries, representing 1/3 of global GDP, are engaged in currency wars” by undervaluing their currency. These governments work with their central banks to manipulate the currency value in order to provide a competitive advantage to boost exports and impede imports. China’s currency is estimated to be 25-40% undervalued. As Paul Volcker, former Secretary of the Treasury, has explained, “In five minutes, exchange rates can wipe out what it took trade negotiators ten years to accomplish.” Foreign government intervention in foreign exchange markets is manipulation, not free trade.

Value Added Taxes (VATs) range from a low of 10% to a high of 24%, averaging 17% worldwide. The U. S. is one of a handful of 159 other countries that do not charge a VAT. This means that American products that are exported are an average of 17% more expensive when imported by a country that adds a VAT. In reverse, foreign imports are an average of 17% less expensive because the U. S. does not charge a VAT. Thus, we reduce tariffs through our trade agreements only to have our trading partners add a tariff by another name to the cost of our products that we export. This gives other countries an unfair competitive advantage in the global marketplace.

We have all read news stories about “product dumping” cases against U. S. industries, such as the tires, steel, and solar panel industries. With regard to government subsidies, the best example is how Foxconn was able to get Apple’s business for manufacturing the iPhone, iPad and now the iWatch because the Chinese government gave them the land and built the building for them.

What is wrong with the TPP?

 The TPP overrules prior acts of Congress and destroys our national sovereignty. For example:

 Buy American Act made Null and Void: For the manufacturing industry for which I play a role, the most adverse effect would be that the U.S. would have to agree to waive Buy America procurement policies for all companies operating in TPP countries. What this means is that the TPP’s procurement chapter would require that all companies operating in any country signing the agreement be provided access equal to domestic firms to bid on government procurement contracts at the local, state, and federal level. There are many companies that survived the recession and continue in business today because of the Buy American provisions for defense and military procurement. The TPP could be a deathblow for companies that rely on defense and military contracts, such as the U. S. printed circuit board industry. Most of the commercial printed circuit manufacturing was already offshored to China and South Korea years ago.

Product Labeling: Country of Origin Labeling, labeling of GMO products, and “organic” labeling could be made illegal because of being viewed as an “illegal trade barrier.” Even the health warnings on tobacco products could be viewed as an “illegal trade barrier.”

Many TPP countries are farm-raising seafood using chemicals and antibiotics that are prohibited in the U. S. and farmed seafood from China is being raised in water quality equivalent to U. S. sewers. According to Food & Water Watch, around 90% of the shrimp and catfish that Americans eat are imported. They warn, “The TPP will increase imports of potentially unsafe and minimally inspected fish and seafood products, exposing consumers to more and more dangerous seafood.”

Bill Bullard, CEO of R-CALF USA (Ranchers-Cattlemen Action Legal Fund, United Stockgrowers of America) has stated “that fast food restaurants are not required to disclose the origins of their beef and even when restaurants say the beef is “U.S. Inspected,” it is as likely as not to be imported.” When we were in Washington, D. C. together last month, Mr. Bullard told me that the increased importation of sheep and lamb from Australia and New Zealand could wipe out the American sheep ranching industry.

The California Farmers Union recently sent a letter to Rep. Davis Valadao (R-CA) stating, “Passage of the TPP would lead to a flood of dairy imports from New Zealand chronically depressing U. S. dairy producer prices…Agricultural imports will rise dramatically under the proposed agreement…The Agreement further poses a threat to the food security that we have long enjoyed as a nation because imports will replace U. S. produced agricultural products.”

Investor State Dispute Resolution: ISDR is designed to allow foreign corporations to bypass the domestic legal system to use to fight laws they don’t like. International Tribunals, not U.S. courts, would decide on lawsuits between “investor” companies in member countries and the U. S. Foreign “investors” could file lawsuits against city, state, and federal agencies for laws and regulations that may infringe on their “expected future profits.” They can also sue for compensation for the loss of these “expected future profits.” Thus, the TPP would infringe upon states’ rights as state and local governments have the constitutional authority to enact rules governing many areas covered by the TPP. But, they will no longer have the freedom to do so in the many regulatory areas covered by the TPP.

The TPP includes hundreds of pages that govern the policies of states concerning non-trade domestic policy and state and local officials would be bound to comply with much of the Agreement’s rules and regulations.

Space doesn’t allow me to cover all of the things that are wrong with the TPP with regard to non-trade issues, such as patent and copyright laws, land use, as well as policies concerning natural resources, the environment, labor laws, health care, energy and telecommunications.

Except for the large multinational corporations that participated in writing the Agreement and are its beneficiaries, there is something for everyone to hate. Opposition to the TPP cuts across party lines ? there are Democrats, Republicans, and Libertarians opposed to many of the “leaked” provisions of the TPP. Organizations from the left to the right are opposed to the TPP as negotiated. It will hurt the 98-99% of American manufacturers who had no place at the table in writing the Agreement. It will hurt American consumers and American workers of all ages. It will harm our environment and put our food and water safety at risk. But, most of all it will destroy our national sovereignty. Now is the time for you to write, call, or email your Senator and Congressional representative to urge them to vote “no” on granting Fast Track authority.

Posted in Country of Origin, Economy, Manufacturing, National security, Taxes/Regulations, Trade, Trade Policy | 1 Comment »

San Diego is a Hotbed of Innovation

Tuesday, December 16th, 2014

On Thursday, December 4th, CONNECT held its 27th Annual Most Innovative New Product (MIP) Award dinner to honor San Diego companies that had launched innovative new products within the last year. There were more than 700 attendees at the event held at the Hyatt Regency La Jolla at Aventine, led by Mistress of Ceremonies Maureen Cavanaugh of the Midday Edition of KPBS. There were 102 nominations that were narrowed down to 24 finalists by 100 judges, culminating in eight new MIP winners. The 2014 MIP Award winners selected were:

Aerospace & Security Technologies

CyberFlow Analytics for FlowScape – The “platform enables Advanced Threat Protection through a sophisticated Anomaly Detection system and has been designed in a modular fashion in alignment with cloud computing principles and runs entirely in the context of virtual machines…the system involves a series of connected multi-model ‘analytics engines’ that contain hundreds of mathematical predictors that can machine learn network communication transmissions and identify odd anomalous behavior across an entire network…[It} is scalable to handle big data network and application flows through cloud-ready virtualized analytics engines.”

The other finalists were: Cubic Defense Applications for Halo Array, 3D Robotics for IRIS, Space Micro, Inc. for IPC7000, Image Processing Computer.

Communications & IT

Cubic Transportation Systems for NextBus Fleet Management Application – The “application is a modular, mobile gateway for connecting passengers and public transport operators to valuable real-time travel and operations information. For passengers, this means knowing exactly where their next bus is so they know how long their wait time is. For operators, it is a cost-effective, high-quality and reliable application to keep buses on schedule and drive efficiencies in their services.”

This award shows that long-established company can still develop an innovative new product. Cubic Transportation System is “the leading provider of revenue collection management systems and services worldwide” and is one of three business segments of parent company, Cubic Corporation. Walter J. Zable founded Cubic Corporation as a small electronics company in San Diego in 1951, and he remained involved in the management of the company as CEO until his death in 2012 at the age of 97.

The other two segments are:

Mission Support Services is “an industry leader in providing comprehensive support services for all echelons of national militaries and security forces in the U.S. and allied nations.”

Cubic Defense Applications is “the leading provider of live air and ground combat training systems worldwide, a key supplier of virtual and immersive training systems, communications and electronics products, and an emerging provider of cyber technologies and global tracking solutions for commercial and national military customers.”

I started working at Cubic Defense when I was 19 years old for the Chief Scientist, Chief Physicist, and a Staff Engineer in the Marketing Department. The latter had previously developed the geodetic SECOR satellite surveying system, the first of its kind to produce a direct coast-to-coast measurement of the United States long before the Global Positioning System was developed. He was on the fast track for advancement and was promoted to Marketing Manager three years later, and I moved up with him as his assistant at age 22. When I started my own manufacturers’ sales rep agency in 1985, both Cubic Transportation and Cubic Defense became customers for companies that I have represented over the years.

The other finalists were: DVEO division of Computer Modules, Inc. for Ad+EAS Serter™ and Tricopian, LLC for FuelRod.

Diagnostics & Research Tools

Organovo, Inc. for 3D Human Liver Model – “Organovo’s Bioprinted Human Tissue Models are multi-cellular, dynamic, and functional 3D human tissue models for preclinical testing and drug discovery research. Created using proprietary 3D bioprinting process, the tissues remain viable and dynamic for extended time in vitro and exhibit key architectural and functional features that mimic key aspects of the natural 3D tissue environment. Biochemical, genomic, proteomic and unique histologic endpoints can be assessed over time.”

In addition to the MIP award, the life science magazine The Scientist’s selected Organovo’s ex Vive 3D human liver tissue for the seventh place spot of the top 10 innovations for 2014.

The other finalists were: bioTheranostics, Inc for Breast Cancer Index (BCI) and Edico Genome for DRAGEN Bio-IT Processor.

Mobile Apps

Rock My World, Inc. for RockMyRun – this is a mobile app that takes biometric data from smart phones and fitness wearable devices “to adjust the tempo of the music you’re listening to in order to match your pace or motivate you to push just a little harder.”

The other finalists were: GreatCall for Urgent Care and Visual Mobility Inc. for SEENiX.

Pharmaceutical Drugs and Medical Devices

Topera, Inc. for Topera’s 3D Mapping System – the system “consists of the FDA cleared and CE marked RhythmView™ Workstation and FIRMap™ Catheter, which are used in combination for the identification and localization of the sustaining mechanisms of cardiac arrhythmias such as atrial fibrillation, atrial flutter, atrial tachycardia, and ventricular tachycardia.”

On October 30, 2014, the Chicago-based healthcare company, Abbott announced it would acquire Topera “with all outstanding equity for $250 million upfront with potential future payments tied to performance milestones.”

The other finalists were: Bioness for Vector Gait and Safety System and Diazyme for 25-OH Vitamin D Assay for Clinical Chemistry Analyzers.

Software

CloudBeds for CloudBeds – It is an operating system for hotels to “provide the hotel with an automated website, booking engine, Facebook presence, revenue management platform, distribution channels, rate and package manager, and light-weight property management system. The system “automates many of these functions so that an hotelier can focus on its guests instead of managing its property and selling its rooms.” Their “goal is to continue to help streamline connectivity between small hotels and their customers using the latest innovations in software — improving their operational and communication efficiencies.” Their focus is on “the large developing world marketplace.”

The other finalists were: Intific for NeuroBridge 2.0 and Raken, Inc. for Raken.

Sport & Active Lifestyle Technologies

Electrozyme LLC for ProFit SE Real-Time Sweat Electrolyte Sensor – this is world’s first wearable personal hydration monitor that can asses assess fluid and electrolyte loss in a real-time non-invasive way to determine if it’s time to rehydrate, what to rehydrate with, and how much to rehydrate.

The other finalists were: Bast Surf for Bast and Cardiff Skate Co. for Cardiff Skates.

Sustainability

Solatube International for Solatube SkyVault Series – the patented technologies of the Sky Vault series combines breakthrough optics with progressive engineering to enhance light capture, focus light over greater distances, or spread light evenly throughout a space.

I wrote about Solatube in the second edition of my book because they “reshored” by returning manufacturing from China to their plant in Vista at the end of 2011, partially because of the risk of intellectual property theft of their proprietary technologies, in addition to increasing costs and difficulty in managing their offshore manufacturing.

The other finalists were: Blue Wave International, Inc. for ClearWaveAir and Measurabl for Measurabl.

Two other awards were given at the event: CONNECT’s Distinguished Contribution Award for Life Sciences Innovation was awarded to philanthropist T. Denny Sanford received, and the Distinguished Contribution Award for Technology Innovation was awarded to Dr. Robert S. Sullivan, Dean of the Rady School of Management, University of California, San Diego.

From inventors being educated and mentored through the San Diego Inventors Forum to entrepreneurial teams developing technology based products being assisted and mentored through CONNECT’s Springboard program, San Diego is a hotbed of innovation. “Since the inception of the program in 1993, more than 3000 scientific and technological breakthroughs have been guided through the process of innovation to commercialization. Together, these companies have raised over $ 1.4 Billion in capital.” To me, this makes San Diego the “Silicon Beach” of California.

Tags:, , ,
Posted in Innovation, National security, Reshoring, Technology | No Comments »

« Older Entries
Newer Entries »